Software/Firmware Installation - Extron electronics FOX3 Matrix Series User Manual

Ethernet protocol settings
The
connected via a serial port or if logged on via the LAN port as an administrator, editing
settings unique to the Ethernet interface.

Software/Firmware Installation

Visit
NOTES:
1.
2.
3.
4.
5.
6.
Network Settings Panel
www.extron.com to download and install the PCS software.
• Also download the latest versions of software and firmware for your product.
An Extron Insider account is required to download either firmware or software
•
Mouse over the Download link at the top of the page (see figure 11,
Figure 11. Software Links on Download Screen
Click the appropriate link on the drop-down list.
For software, either click the Software link (
directly on that link (see the PCS Product Configuration Software link
to step 5.
For firmware, click the Firmware link (
If there is no direct link to your software, click the Software link (
Scroll down to the alphabetic navigation bar (see figure 12).
Figure 12. Software Installation
Click the appropriate letter to locate the software or firmware.
Click Download and follow the on-screen instructions (see figure 13,
Figure 13. PCS Software Download
FOX3 Matrix Series Switcher • Product Configuration Software
(see page 43) provides a location for viewing and, if
) or, if the software is listed, click
2
).
4
).
1
) and skip
3
).
2
for PCS).
1
30