Extron electronics FOX3 Matrix Series User Manual page 35

Command
Function
Audio Configuration and Adjustment
NOTES:
•
Input gain and attenuation does not affect video inputs (with embedded audio) that are tied to video outputs.
•
For attenuation, the negative sign (–) must be entered and is reported in the response. For gain, the positive sign (+) is optional and is returned in
response.
Audio input gain
Set audio input gain
Example
Increase input audio gain
Decrease input audio gain
Gain for audio input
X1#
KEY:
= Audio gain/attenuation value
X3(
= Analog audio input number
Audio output volume
Output audio volume
increment
Output audio volume
decrement
Output volume level
Audio volume for output
X1^
KEY:
= Volume adjustment range
X4)
= Analog audio output number
Verbose mode
Set verbose mode
View verbose mode
NOTE:
Verbose mode will revert back to default in the event of a power cycle, disconnect from SSH client, or disconnect from the Ethernet.
X2)
KEY:
= Verbose mode
Timeout Ethernet data port
Set current port timeout
View current port timeout
X2!
KEY:
= Timeout
SIS over SSH (port 22023)
Enable Echo
Disable Echo
View Echo status
X$
KEY:
= Enable or disable
SIS Command
(Host to Device)
X3( X1#
* G
50001*+1g
50001*-15g
X3(
+G
X3(
-G
X3(
G
Verbose mode 2/3
-18 +24
to
00
to max number of inputs (Analog
X4)
+V
X4)
-V
X4) X1^
* V
X4)
V
0 100
to
00
to max number of outputs (Analog
E X2) }
CV
E }
CV
0 1
= Clear/none (default), = Verbose mode,
3
= Verbose mode and tagged responses for queries
E X2! }
0* TC
E }
0TC
The number of seconds (each step = 10 seconds) before timeout on IP connections
1 65000
(min= , max= [default=
E }
1ECHO
E }
0ECHO
E }
ECHO
0 1
= Disable, = Enable (default)
FOX3 Matrix Series Switchers • SIS Configuration and Control
Response
(Device to Host)
X3( X1#]
In • Aud
]
In50001 Aud+01
]
In50001 Aud-15
X3( X1#]
In • Aud
X3( X1#]
In • Aud
X1# ]
X3( X1# ]
In • Aud
50001
X4) X1^]
Out • Vol
X4) X1^]
Out • Vol
X4) X1^]
Out • Vol
X1^ ]
1 0%
(approximately dB per step
50001
X2)]
Vrb
X2)]
2
= Tagged response for queries,
X2!]
Pti0*
X2!]
30 300
= seconds]).
]
Echo1
]
Echo0
X$]
Additional Description
Set audio gain per input.
Increase input audio gain 1 step per
input.
Decrease input audio gain 1 step per
input.
View audio gain level per input.
50004
- )
Increment audio volume per output.
Decrement audio volume per output.
Set audio volume level per output.
View audio volume level per output.
100% 100%
to , default )
50004
- )
If no data is received during the timeout
period, the Ethernet connection closes.
Returns command entered with
response.
Returns response only.
27