Roles And Permissions Panel - Extron electronics FOX3 Matrix Series User Manual

Roles and Permissions Panel

The Roles and Permissions panel (see figure 28,
Admin and User passwords have been set. It does not display the actual password.
NOTE: The following rules apply to passwords:
• Length is 1-128 characters.
All human-readable characters are permitted except |.
•
The password cannot be a single space.
•
• Passwords are case-sensitive.
If the Admin password is cleared, the user password is cleared as well.
•
• The factory configured passwords for all accounts on this device have been set to
the device serial number. In the event of a complete system reset, the passwords
convert to the default, which is extron for the Admin and User.
To assign a administrator and user passwords:
In the Roles and Permissions panel,
1.
click EDIT (see figure 34). The Role and
Permission Settings dialog box opens.
In the Admin panel, click the Change
2.
Admin Password link and enter the new
administrator password in the field below
(see figure 35).
3. Click in the Confirm Admin Password
field and enter the password from the
Change Admin Password field.
4. To assign a user password, repeat steps 2 and 3 in the User panel.
5. When finished, click SAVE to
set the passwords. To close
the window without saving a
password, click CANCEL or the X in
the upper-right corner.
Passwords can be changed but they
cannot be removed entirely. The FOX3
must have passwords at all times.
These fields cannot be blank.
, on page 42) displays whether
5
Figure 34.
Figure 35. Passwords Dialog Box
FOX3 Matrix Series Switcher • Internal Web Page
Roles and Permissions
Panel
45