Fork & Headset Installation - Argon 18 E-119 TRI 233A Assembly Manual

E-119 TRI 233A: 8. Fork & Headset Installation
Compression
column can also
be screwed from
the bottom using a
hex 10mm key.
GREASE
Hex 10mm
2.8
GREASE
GREASE
2.7
2.6
6Nm
3. Slightly unscrew the steering
column screw (2.6) located on the
fork.
4. Screw in the compression column
(2.8 - specific to the size of your
frame) inside the head tube. The
threads must be lightly greased until
the compression column can be
inserted smoothly and tightly. Use the
3d headset tool provided (5.8).
5. Make sure the fork doesn't have any
side play and that the assembly turns
smoothly.
6. Screw in the steering column screw
(2.6) at 6Nm.
12