Table of Contents
Advertisement
11.
3D Headset Installation
As with almost all Argon 18 bikes,
the Krypton provides you with
the benefit of the 3D system. This
system allows for 2 positions:
0mm and 25mm.
200827 (364A)
200823 (365A)
200825 (365B)
200828
200829
If the 25mm 3D headset is
desired, follow the steps
below. If no 3D headset is
desired, no action is required:
1.
Install the 3D headset plastic
sleeve (SKU: 200829) into the top
of the head tube. (Apply grease on
the sleeve)
2.
Insert the 25mm headset sleeve
(SKU: 200828). (Apply grease on
the column)
3.
Secure the assembly using a head-
set press.
4.
Push the 25mm Cap on the column
while aligning the pin in the
frame hole.
Advertisement
Table of Contents
