Table of Contents
Advertisement
10.
3D Headset Installation
As with almost all Argon 18 bikes, the
dark matter provides you with the
benefit of the 3D system. This system
allows for 2 positions: 0mm and 25mm.
100571 (363A)
100572 (363B)
200845
200829
If the 25mm 3D headset is desired,
follow the step below, if no 3D
headset is desired, no action are
required:
1.
Install the 3D headset plastic
sleeve (SKU: 200829) into the top
of the head tube. (Apply grease on
the sleeve)
2.
Insert the 25mm headset plastic
sleeve
. (Apply grease
(SKU: 200845)
on the column)
3.
Press the assembly using a
headset press.
4.
Push the 25mm Cap on the column
while aligning the pin in the
frame hole.
Advertisement
Table of Contents
