Table of Contents
Advertisement
8.
3d headset installation
0mm
100361 - 25mm
100362 - 15mm
100156
+25mm
Assembling the 3D headset ( 0mm )
1.
If the 0mm configuration is chosen, the bearing goes directly in the headtube.
Assembling the 3D headset ( +15 / +25mm )
1.
Apply grease to the inside of the headtube.
2.
Insert the plastic sleeve (100156) into the headtube.
3.
Apply grease on the plastic sleeve (100156).
4.
Position the 3D column (100361 or 100362) perfectly straight on the
headtube opening.
5.
Slowly press the cups into the frame using a headset press + adaptor until it sits
flush with the frame.
+15mm
Available Separately
Advertisement
Table of Contents
