Enter Password - Riello INSIEME EVOe 32 B/110 LN Installation And Maintenance Manual

MENU selection
Access the "menu" mode by pressing the key "ENTER/RESET" The digits of the small display indicate "0000", which is the first acces-
sible menu.
In this mode, keys have the following functions:
Nr. Button
1 "+"
2 "-"
3 "▲"
4 "▼"
5 "ENTER/RESET"

2.15 Enter password

To access INSTALLER parameters, it is necessary to enter the pass-
word:
− Press the key "ENTER/RESET" and select "Code" by using
the keys "▲" and "▼".
− Press the key "ENTER/RESET" to confirm
1
2
Function
Exits from the menu and cancels a parameter change
Exits from the menu and cancels a parameter change
Selects the following menu or increases a certain parameter value
Selects the previous menu or decreases a certain parameter value
Enters into the selected menu/parameter or confirms the parameter change
After entering the INSTALLER password the relevant menus and
parameters will also be displayed.
The system provides for three types of access:
USER: new password
INSTALLER: password 18
9
29
3
4
5
− Press the keys "▲" and "▼" to increase or decrease the
value of the blinking digit
− Once the required value is obtained, press the key "EN-
TER/RESET" to confirm the entered value
After entering the password, the display will show the sym-
bol which will be displayed until the displaying and/or
parametrisation proceed. After some minutes of inactivity of
the display, it must be entered again.
INSTALLATION