Password Access - Riello Condexa PRO NA 75P Installation, Operation And Service Manual

Values can be changed with the ▲ / ▼ buttons.
Confirm the value entered by pressing the ● button and move to
the next value.
Date & Time
" "
Date:
" "
Time:
" "
Time Zone Settings
" "
Display Settings
" "
To set the time, follow the same procedure.
By accessing the "Time Zone Set." menu, it is possible to set the
time zone parameter as shown in the figure below:
Time Zone Settings
" "
Time Zone Correction
"
Daylight Savings Time
"
To change the way in which date and time are displayed, it is pos-
sible to change the following characteristics by accessing the "Dis-
play Parameters" menu:
Display Settings
" "
Time Notation
" "
Date Order
" "
Day Of Month
" "
Month
" "
Display Settings
" "
Year
" "
Date Separation Character
"
Day Of Week
" "
Seconds
" "
Sunday 10/25/2015
" "
03:02
UTC +00.00
"
Disabled
" " "
24h
" "
DMY
" "
2Digits
" "
2Digits
" "
4Digits
" "
-
" " "
Short Text
" "
No
" "

4.7.3 Password access

To access the parameters, press the MENU key and select "Settings"
with the ▲ / ▼ buttons.
Menu
" "
Domestic Hot Water (DHW)
"
Information
" "
Settings
" "
System Test
" "
Confirm with the ● button and select "Boiler settings" with the ▲
/ ▼ buttons
Settings
" "
General Settings
" "
Boiler Settings
" "
Press the ● button to confirm.
− The system will now ask you to enter a password (the pass-
word is required for boiler settings only):
Password
" "
Enter one digit at a time using the ▲ / ▼ buttons to increase/
decrease the numeric value. When you have set the right value,
confirm by pressing the ● button.
The system provides for three types of access:
USER (password not required, e.g. password No. 0000)
INSTALLER (password No. 0300)
9
NOTE: After it is entered, the password is active during display
and/or parameter mode. If the display is inactive for a few
minutes, it needs to be re-entered.
69
COMMISSIONING AND MAINTENANCE
"
0 * * *