Configuring The Device - Siemens RUGGEDCOM RSG909R Installation Manual

Device Management
3.2 Configuring the Device
Ethernet Ports
Connect any of the available Ethernet ports on the device to a management switch
and access the RUGGEDCOM RSG909R console and Web interfaces via the device's
IP address. The factory default IP address for the RUGGEDCOM RSG909R is
192.168.0.1.
For more information about available ports, refer to
25)".
3.2

Configuring the Device

Once the device is installed and connected to the network, it must be configured.
All configuration management is done via the RUGGEDCOM RSG909R interface. For
more information about configuring the device, refer to the RUGGEDCOM RSG909R
User Guide associated with the installed software release.
24
"Communication Ports (Page
RUGGEDCOM RSG909R
Installation Manual, 02/2020, C79000-G8976-1388-09
https://-