Copper Ethernet Port Specifications; Operating Environment; Mechanical Specifications - Siemens RUGGEDCOM RSG909R Installation Manual

Standard
62439-2:2016
62439-3:2016
5.4

Copper Ethernet Port Specifications

The following details the specifications for copper Ethernet ports that can be ordered
with the RUGGEDCOM RSG909R.
Speed
Connector
Duplex
Cable Type
Wiring Standard
Maximum Distance
Isolation
a
Auto-negotiating.
b
Shielded.
c
Auto-crossover and auto-polarity.
d
Typical distance. Dependent on the number of connectors and splices.
e
RMS 1 minute.
5.5

Operating Environment

The RUGGEDCOM RSG909R is rated to operate under the following environmental
conditions.
Ambient Operating Tempera-
ture
Ambient Storage Temperature
Ambient Relative Humidity
Maximum Altitude
a
Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.
b
Operating temperature may vary based on the limitations of installed SFPs. Refer to the RUGGEDCOM
SFP Transceivers Catalog for SFP temperature ratings.
c
Non-condensing.
5.6

Mechanical Specifications

Weight
Ingress Protection
RUGGEDCOM RSG909R
Installation Manual, 02/2020, C79000-G8976-1388-09
10 Mbps Ports
IEC
IEC
ü
a
10/100/1000Base-TX
RJ45
a
FDX/HDX
b
> CAT 5
c
TIA/EIA T568A/B
d
100 m (328 ft)
e
1.5 kV
a b
c
5.4 Copper Ethernet Port Specifications
100 Mbps 1000 Mbps
Ports Ports
ü ü
ü ü
-40 to 85 °C (-40 to 185 °F)
-40 to 85 °C (-40 to 185 °F)
5% to 95%
2000 m (6562 ft)
2.4 kg (5.3 lbs)
IP40
Technical Specifications
Description
Media Redundancy Protocol
(MRP)
High-Availability Seamless Re-
dundancy (HSR), Parallel Redun-
dancy Protocol (PRP)
31