Custom Door Panel Installation Dimensions - Rs80 - Fisher & Paykel RS90AU Installation Manual

Dimensions apply for the preparation and installation of custom door panels.
For Dwg and Dxf files of the below panel preparation download the folder on thekitchentools.fisherpaykel.com.
54.8mm
Ensure handle is mounted
65mm from inner edge of panel
to the center — this will avoid
interference with brackets.
All measurements to be made
from inner bottom corner.
For the second panel mirror
and repeat dimensions using
inner bottom corner as the
reference point.
CUSTOM DOOR PANEL INSTALLATION DIMENSIONS — RS80
342.3mm
Ø 2mm REF
12x Pilot holes recommended for bracket attachment.
(Do not penetrate front surface).
34.7mm
34.7mm
364mm
TOP PANEL — REAR VIEW
Recommended hole locations for installing Fisher & Paykel design handle.
65mm
TOP PANEL — REAR VIEW
Handle location for Left
hinge refrigerator
Handle location for Right
hinge refrigerator
65mm
Ø 6mm REF
4x Through holes recommended
for handle attachment.
11