Folder Structure Of The Flash Card - WEIGL ProCommander LX Instruction Manual

12 Folder structure of the Flash Card

To begin shows, audio files, or respectively playlists, folder
and file names have to follow a predefined order.
Generally, only one subdirectory is supported.
All shows must therefore be in the folder "SHOWS". The first
three characters of the show name must have a number in the
range of 001-999. The remaining 5 characters do not matter.
Leading zeros in the range from 001-099 are required. The file
extension must be „WM1".
Example:
001_SHOW.WM1, 023_TEST.WM1, 320_PLAY.WM1
By using this order, remote access to the shows can be done
very easily just by number. This can be used for starting shows
within a show as well as for calling shows from outside by a
corresponding definition in the Control.ini file.
The same syntax applies to audio files. These must be stored
in the folder "AUDIO". The naming of the audio file is analogous
to the show files. The file name has to begin with a number
between 001 and 999 followed by any 5 other characters. The
file extension must be "OGG" and it has to be an OGG-Vorbis
file.
Folder structure of the Flash Card
81