WEIGL ProCommander LX Instruction Manual page 37

In the first line „Port 1 Value" is displayed, this corresponds
to the LEVEL 4 of the menu plan. The second line of the display
shows the current value and corresponds with LEVEL 5 of the
menu plan.
For example you want to change the value of port 3, you
have to move the joystick up until „Port 3 Value" is displayed.
Now, port 3 is active, now you can change the value of port 3.
Therefore you have to move the joystick to the right until you
are in the second line of the display. You will see a line below
the digits. Now you can select a value between 0-9 by moving
the joystick up or down. With the movement of the joystick to
the left and right you can switch between the current digits.
Once you have changed the parameters of the current ports
according to your wishes, confirm the entry by pressing Enter.
By moving the joystick to the left, you can return to a parent
LEVEL.
Set Factory – LEVEL 3
With the function „Set Factory" you can restore to factory
settings of the ProCommander LX. Therefore you have to
activate „Set Factory" by pressing Enter.
You will be automatically be forwarded to LEVEL 4 of the
menu plan. If you confirm „Set Factory?" with Enter, the
ProCommander LX will be automatically restored to the factory
settings.
Modification of the menu of ProCommander LX
37