WEIGL ProCommander LX Instruction Manual page 22

ProCommander LX pin assignments
DMX-IN
An external
integrated merge function a part of this external
may be merged into the internal signal. Please refer to the
chart for the merge function settings.
22
SMPTE TIME CODE-IN/OUT
With this connection the SMPTE timecode can be read as
well as
(FramesPerSecond), 25FPS and 30FPS. With the software it can
be defined, which time code is going to be read or generated.
REMOTE 1-8 / 9-16
The ProCommander LX has 16 remote inputs for connecting
external dry contacts. Inputs 9-16 are analogue inputs, which
can evaluate voltages from 0-10V with a 10-bit resolution. The
query of the inputs is via the „GET" commands (see
chart).
When shows are stored on a
by a level change of the individual inputs. The assignment of the
shows to the different inputs can be defined in the Control.ini
file. See chapter 10 Control.ini for more information.
DIGITAL OUTPUT 1-8 / 9-16
The ProCommander LX has 16
Outputs 1-8 are standard
DMX signal can be connected. With the
generated. Possible
open collector
frame rates
SD card, they can be triggered
open collector
(transistor) outputs.
DMX signal
ASCII
are 24FPS
ASCII
outputs.