Control.ini - WEIGL ProCommander LX Instruction Manual

10 Control.ini

The Control.ini file is a new and easy way to assign different
input events to any of the available ASCII-commands without
any special show programming. It is even possible to assign an
input event to several successive commands. An input event
may be a change of the remote inputs, a time event or a variable
change.
A level change of the remote inputs may be defined as
„close"-event (means activation of an input), „open"-event
(deactivation of an input) or „toggle"-event (every level change
at an input). With toggle, both the press and the release of a
key action will cause a trigger event.
If the device has resources to process the commands, all
functions of the ASCII-protocols are available. They have to
follow instantly the entry event. Further commands have to start
with the "!" exclamation mark. After the last command a "#"
hash tag has to be placed (see example).
The Control.ini file can be created with any text editor. After
completion, it should be copied into the main directory (root
directory) of the SD
During execution there is no complex syntax check.
Therefore, the programmer is responsible for correct command
syntax.
card.
Control.ini
71