WEIGL ProCommander LX Instruction Manual page 77

!i5o!cfm32<5#
!tm01:20!rsn:\SHOW\001_SHOW.WM1#
!t&05:00!rsn:2#
!tc08:00!rsn:\SHOW\003_SHOW.WM1#
st
1 line: if input 1 is closed, the
4 will be activated and additionally the
set to 255.
nd
2 line: send „Hello World" at RS232-3, when input 2 is
activated.
rd
3 line: with falling edge (opening contact) of input 3 fades
PWM output 1 to 20% in the time 2.5 seconds.
th
4 line: with every level change of input 4, the PWM outputs
1 to 4 are set to value 50%.
th
5 line: on activation of the input 5, the volume fades to 0
within 5 seconds.
th
6 line: on releasing input 5, the volume fades in again with
fade time 5 seconds to that value, which is stored in EE-Prom.
th
7 line: 1 minute and 20 seconds after switching on the
device or after insertion of the
001_SHOW.WM1 begins.
open collector outputs 1 and
DMX channel 10 will be
SD card, the show
Control.ini
77