WEIGL ProCommander LX Instruction Manual page 36

Modification of the menu of ProCommander LX
LEVEL 3 locate under 5.2.1 MainSetup – LEVEL 2 following
functions: Set IP-Adrs – LEVEL 3, Set Port – LEVEL 3 and Set
Factory – LEVEL 3.
Set IP-Adrs – LEVEL 3
With the function „Set IP-Adrs" you can change the IP
address of the ProCommander LX. You have to activate „Set IP-
Adrs" by pressing Enter.
In the first line of the display „IP-Adrs:" appears, this
corresponds to the LEVEL 4 of the menu plan. The second line
of the display shows the current value and corresponds to
36
LEVEL 5 of the menu plan.
Move the joystick to the right or left to change the requested
digit. The underscore below a digit indicates which can be
changed. You have to move the joystick up or down to adjust a
value between 0-9. Once you have set the requested IP-
Address, confirm with Enter.
By moving the joystick to the left, you can return to a parent
LEVEL.
Set Port – LEVEL 3
With the function „Set Port" you can change the values of
the ports
activate „Set Port" by pressing Enter.
1-4 of the ProCommander LX. Therefore you have to