WEIGL ProCommander LX Instruction Manual page 60

ProCommander LX configuration
60
If the configuration is made through network you have to be
aware, that the
the subnet mask
ProCommander LX.
The factory setting of the
subnet mask
To connect your computer with the ProCommander LX you
have to change the network settings. For this purpose you open
the network properties through the control panel.
Chose the internet protocol version 4 and press the button
„properties".
IP address of the computer in combination with
matches with the factory settings of the
IP address
is 255.255.255.0.
is 10.0.0.101, and the