Changing The Password - Ametek IPS-4-UV User Manual

If you attempt to enter a password but one hasn't been entered in the
Change Password function yet, the message "Use Change Password
to enable" is displayed.
If you enter a password incorrectly, the message "Password incorrect"
is displayed. If a password has been entered here, and you press
, the message "System Unlocked" is displayed.
TER
Change Password
Use this function to enter a password for the first time after installing
the analyzer or whenever you are changing the password. The pass-
word entered here is the password that must be entered in the Enter
Password function that will allow you to change the analyzer configu-
ration settings.
Because the analyzer is shipped from the factory without a password,
you must enter a password in the Change Password function before
you can change parameter settings. If you attempt to change the
password without first entering the password, the message "System
Locked" appears.
Keys that can be used to enter a password include any of the numeric
keys (0–9), decimal key ( . ), and the minus ( – ) key. A maximum of
nine characters can be used for the password.
Lock
Use this functions to clear the password from memory and "lock" all
parameters, settings, and functions as read-only. When you select
Lock and press
ENTER
"System locked" is displayed. When the system is locked, a padlock
icon ( ) appears in the top-right corner of the HOME screen.

Changing the Password

Occasionally, you should change the password that allows you to make
changes to the analyzer configuration settings. If password protection al-
ready exists, you must enter the existing password before you can change
it.
To change the password:
1. Select Enter Password and press
press again. The software will now allow you to change the
ENTER
password.
2. Select Change Password and press
and press . Record and store the password in a safe place for
ENTER
reference.
, the parameters are locked out and the message
. Key in the password and
ENTER
. Key in the new password
ENTER
Controller / User Interface | 4-31
EN-