Microswitches And/Or Drive Cam Replacement - Pentair Fleck 5600 SXT Installer Manual

Installer manual Fleck 5600 SXT - Maintenance
9.4.5

Microswitches and/or drive cam replacement

1. Using a Philips screwdriver, unscrew (1) and remove the cover (2).
2. Disconnect the wire on the microswitches (6).
3. Using a Philips screwdriver, unscrew (8).
4. Remove the protection plate (7) and the micorswitches (6).
5. Using a Philips screwdriver, unscrew (5) and remove the drive cam (4) and the washer (3).
6. Change the drive cam (4) and/or the microswitches (6).
7. Reverse above procedure steps to rebuild.
82 / 104 Ref. MKT-IM-013 / E - 23.09.2020