Installer manual Fleck 4600 SXT - Maintenance
9.4.5
Microswitches and/or drive cam replacement
1. Using a Philips screwdriver, unscrew (1) and remove the cover (2).
2. Disconnect the wire on the microswitches (6).
3. Using a Philips screwdriver, unscrew (8).
4. Remove the protection plate (7) and the micorswitches (6).
5. Using a Philips screwdriver, unscrew (5) and remove the drive cam (4) and the washer (3).
6. Change the drive cam (4) and/or the microswitches (6).
7. Reverse above procedure steps to rebuild.
78 / 100
Ref. MKT-IM-028 / C - 22.09.2020