Master Programming Mode Chart - Pentair Fleck 5600 SXT Installer Manual

Installer manual Fleck 5600 SXT - Programming
6.5.1

Master programming mode chart

Parameter
DF Display format
RF Regeneration
flow
CT Regeneration
control type
NT Number of
tanks
TS Tank in service
C Unit capacity
V Filter capacity
H Feedwater
hardness
RS Reserve
selection
SF Safety factor
56 / 104
Options Definition
GAL US units
Ltr Metric units
dF1b Std DF single
backwash
dF2b Std DF double
backwash
FLtr Filter
UFbd UF brine first
UFlt UF filter
Othr Other
Fd Metered delayed -
FI Metered
immediate
tc Time clock
dAY Day of the week
1 Single tank
system
2 Double tanks
system
U1 Tank 1 in service Only displayed for double tanks
U2 Tank 2 in service
0.1 to 9'999 (°TH/°dH).L
x1'000
1 to 9'999 x1'000 grains
0.1 to 9'999 x1'000 L
1 to 9'999 GAL
1 to 9'999 x1'000 GAL
1 to 1'990 °TH/°dH
1 to 199 grains per gallon Only displayed for volumetric
SF Safety factor
rc Fixed reserve
capacity
0 to 50
-
-
Standard for 9000 Twin valve
-
To be used with standard piston only.
-
To be used with UF piston only.
-
Standard for 9000 Twin valve
-
-
-
-
system.
Only displayed for volumetric
regenerations with DF set in Ltr.
Only displayed for volumetric
regenerations with DF set in GAL.
Only displayed for filter with DF set in
Ltr.
Only displayed for filter with DF set in
GAL.
Only displayed for volumetric
regenerations with DF set in Ltr.
regenerations with DF set in GAL.
-
-
% Only available if set in reserve
selection.
Ref. MKT-IM-013 / E - 23.09.2020
Note