Controller Replacement - Pentair Fleck 5600 SXT Installer Manual

Installer manual Fleck 5600 SXT - Maintenance
9.4.3

Controller replacement

1. Using a Philips screwdriver, unscrew (1) and remove the cover (2) paying attention for the
wire.
2. Press the board clips (3) and release the controller cover (6).
3. Using a flat screwdriver, unscrew (5) and remove the controller (4).
4. Remove carefully the wire connectors (7).
5. Connect the new controller, see Electrical connections [ Page 46].
→
6. Reverse above procedure steps to rebuild.
Ref. MKT-IM-013 / E - 23.09.2020 79 / 104