Table of Contents
Advertisement
Complete Manual for RoboSHOT HDBT High-Performance PTZ Cameras
IR Remote Details
The Vaddio remote provides the following functions:
Power – Switch the selected camera on or off.
Power indicator – Lights momentarily when you press a button.
Back Light – Use or turn off Back Light Compensation.
Data Screen – Display the camera's IP address and MAC address. Press this button
again to dismiss the display.
Camera Select – In multi-camera installations, selects the camera to be controlled.
For older cameras with DIP switches on the back, see
Behavior Settings
for information on configuring the camera as camera 1, 2, or 3. For
the newer Elite series cameras, see
5 and RoboSHOT 30E
CAT-5.
Pan/Tilt (arrow button) controls and Home button – Control the camera's
position.
Rev. Pan and Std. Pan– Control how the camera responds to the arrow buttons.
Helpful for ceiling-mounted cameras and for presenters who are controlling the
camera.
Pan/Tilt Reset – Not used.
Auto Focus – Switch the camera to Auto-Focus mode.
Zoom Speed – Select Slow or Fast movements for telephoto and wide-angle shots.
T slow and T fast – Telephoto (zoom in)
n
W slow and W fast – Wide-angle (zoom out)
n
Manual Focus – Switch the camera to Manual Focus mode.
Near (-) adjustment – Moves the focus nearer when in manual focus mode.
Far (+) adjustment – Moves the focus farther when in manual focus mode.
Preset – Save the camera's current position as one of the numbered presets.
Reset – Clear a saved preset.
Position Presets 1 through 6 – Move the camera to a predefined position, or specify the preset to save or
clear.
The web interface offers greater control over camera movements to presets (such as setting the speed for
Tri-Synchronous Motion), and provides additional presets.
Storing a Preset Using the Remote
Position the camera. Then hold down the Preset button and press one of the numbered preset buttons.
Clearing a Preset Using the Remote
Press and hold the Reset button while pressing the preset number you want to clear.
DIP Switches: Camera
Basic Camera Settings for RoboSHOT 12E CAT-
24
Hide quick links:
Advertisement
Table of Contents
