Table of Contents
Advertisement
Complete Manual for RoboSHOT HDBT High-Performance PTZ Cameras
Connecting the Camera
Note
Talk to the network administrator before you connect the equipment.
If you install this equipment on a non-DHCP network (one that uses only static IP addresses), you may
need to configure the camera with a static IP address before you connect it to the network. Work with the
network administrator to determine how to configure the equipment.
See
Configuring the Camera with a Static IP Address
for step-by-step instructions to configure a static IP
address.
Basic Connections – RoboSHOT 12E HDBT or RoboSHOT 30E HDBT
This diagram shows a basic installation for a RoboSHOT 12E HDBT or RoboSHOT 30E HDBT. The older
RoboSHOT HDBT cameras can be connected in the same way, using a PoE+ mid-span power injector.
16
Hide quick links:
Advertisement
Table of Contents
