Connecting The Camera; Basic Connections - Roboshot 12E Hdbt Or Roboshot 30E Hdbt - VADDIO RoboSHOT HDBT Series Installation Manual

Installation Guide for RoboSHOT HDBT High-Performance PTZ Cameras

Connecting the Camera

Note
Talk to the network administrator before you connect the equipment.
If you install this equipment on a non-DHCP network (one that uses only static IP addresses), you may
need to configure the camera with a static IP address before you connect it to the network. Work with the
network administrator to determine how to configure the equipment.
Refer to the Complete Manual for RoboSHOT HDBT High-Performance PTZ Cameras (System
Administration section) for information on configuring static IP addresses.
Basic Connections – RoboSHOT 12E HDBT or RoboSHOT 30E HDBT
This diagram shows a basic installation for a RoboSHOT 12E HDBT or RoboSHOT 30E HDBT. The older
RoboSHOT HDBT cameras can be connected in the same way, using a PoE+ mid-span power injector.
16