Uhf Setting - Toshiba B-EX Series Operation Manual

8.12.3.4 WRITE RETRY
The number of times tag write is retried and the timeout for write retry are set.
The printer retries to write data onto an RFID tag for up to specified number of times. If the timeout period
expired before the max. number of retries have been done, the printer stops the retries at the time.
Max. Min. value
value
255 0
The timeout for RFID tag write retry is set.
If the printer has retries for the max. umber of times within the RFID write retry timeout, the printer stops the
retries at the time.
Max. Min. value
value
9.9 0.0

8.12.4 UHF SETTING

The formation related UHF setting is displayed.
・ POWER LEVEL
・ Q VALUE
・ AGC THRESHOLD
・ WRITE AGC THRESHOLD
・ WRITE RETRY MIN AGC
8.12.4.1 POWER LEVEL
Max. Min. value
value
*1 *1
Radio output level of UHF.
The range of output level is 26 (approximately 500mW) to 9 (approximately 10mW).
*1: The maximum and minimum values vary depending on the module type.
B-EX700-RFID-U2-R
B-EX700-RFID-U2-EU-R/US-R/CN-R
Step Display
1 Decimal
Step Display
0.1 Decimal
Step Display
1 Decimal
Sign Integer
digit
None 3
Sign Integer
digit
None 1
Sign Integer
digit
None 3
Initial value Max. value
18
18
122
Decimal 0-padding
place
0 None
Decimal 0-padding
place
1 None
Decimal 0-padding
place
0 None
Min. value
26
18
Unit of
measure
Times
Unit of
measure
Second
Unit of
measure
None
18
9