Module - Toshiba B-EX Series Operation Manual

8.12.2 MODULE

The following information related to the module setting is displayed.
・ MODULE TYPE
・ COUNTRY
・ TAG
・ RF CHANNEL
8.12.2.1 MODULE TYPE
・ NONE
・ H1
・ H2
・ U2
・
・
NOTE: This setting will become effective after the printer power is turned off, and back to on.
8.12.2.2 COUNTRY
The country code of the currently installed module is displayed.
If the module type is set to other than "U2", "INVALID" is displayed.
It is possible to change the country setting when the module type is set to "U2" and the actually installed
module type is U2-US or U2-EU.
country setting causes the output frequency to change.
The following message is displayed depending on the module type setting, the mounted module type, and
the module mount condition.
Description
No module
H1/H2
U2 (No module)
U2 (Country has been set.)
U2 (No country has been set.)
U2 (China)
No RFID module is installed.
B-EX700-RFID-H1-QM-R
B-EX700-RFID-H2-R
B-EX700-RFID-U2-EU-R (Europe, India)
B-EX700-RFID-U2-US-R (North America, Australia, Taiwan, Korea)
B-EX700-RFID-U2-CN-R (China)
However, this menu is password-protected because changing the
(No message)
(No message)
No RFID Module
[ENTER] for Setting
Need Setting for use
[ENTER] for Setting
Cannot change COUNTRY
Setting.
Message
119