11 Auto Configuration Mode
11.1 Outline of the Auto Configuration Mode
Turning on the printer while holding down the [CANCEL] key causes the printer to enter auto configuration
mode .
The auto configuration mode allows for automatically downloading the master firmware and restarting the
printer.
Power OFF
11.2 Preparation for USB Memory
To execute the auto configuration mode, the firmware file (*.bin) to be downloaded and the dedicated CFG
file need to be created in the USB memory in advance.
Each file is saved in the SYSTEM directory created in the root directory for the USB memory.
Example: When BOOT/MAIN/CG are downloaded:
/ATA0/SYSTEM/B-EX-BOOT-Vx.x-xx.bin
/ATA0/SYSTEM/B-EX-MAIN-Vx.x-xx.bin
/ATA0/SYSTEM/B-EX-CG-Vx.x-xx.bin
/ATA0/SYSTEM/AUTOCONFIG.CFG
[CANCEL]
[PAUSE]/[MODE]/
[CANCEL]/[ENTER]
[ENTER]
(1) Power off state
(2) Turn on the printer while holding down the
[CANCEL] key.
(3) Auto configuration mode display
(4) Press the [PAUSE], [MODE], [CANCEL] or [ENTER]
key to show the next display.
(5) Confirmation display
(6) Select "OK" and press the [ENTER] key.
* When "CANCEL" is selected, the printer returns to the
online state without downloading the firmware.
(7) The firmware is being downloaded.
(8) After downloading is completed, the printer will be
placed in the online state
144