Toshiba B-EX Series Operation Manual page 77

8.4.2.17 THRESHOLD SELECT
・ REFLECT Reflective sensor
・ TRANS. Transmissive sensor
8.4.2.17.1 REFLECT
・ MANUAL SET
・ COMMAND SET
8.4.2.17.2 TRANS.
・ MANUAL SET
・ COMMAND SET
8.4.2.18 ENERGY TYPE
This parameter is intended to make the printer perform appropriate printing for the supplies to be used.
Use of a different supply from the setting may cause poor printing.
For details of the appropriate settings, refer to the Supply Specification.
・ TRANSFER
・ DIRECT
8.4.2.18.1 TRANSFER
<B-EX4T1-G/T>
・ Semi resin1
・ Semi resin2
・ Resin1
・ Resin2
・ Resin3
・ Reserve2 to Reserve6
<B-EX4T2-G/T and B-EX6T2-G/T>
・ Wax1
・ Wax2
・ Semi resin1
・ Semi resin2
・ Resin1
・ Reserve1 to Reserve5
<B-EX4T2-H>
・ Resin1
・ Resin2
・ Reserve1 to Reserve8
8.4.2.18.2 DIRECT
・ Standard
・ Reserve1 to Reserve9
Threshold set in the threshold mode takes effect.
Threshold set by command takes effect.
Threshold set in the threshold mode takes effect
Threshold set by command takes effect.
Semi-resin 1
Semi-resin 2
Resin 1
Resin 2
Resin 3 ("Resin3" shall not be selected for the B-EX4T1-T model.)
Reserved
Wax 1
Wax 2
Semi-resin 1
Semi-resin 2
Resin 1
Reserved
Resin 1
Resin 2
Reserved
Standard
Reserved
72