Communicate With The Module; Interpret Status Indicators - Allen-Bradley C Series Installation Instructions Manual

POINT I/O 8 Channel High Density Current Input Module Installation Instructions

Communicate with the Module

POINT I/O modules send (consume) and receive (produce) I/O data (messages). You map this data onto the processor's memory.
This module produces 24 bytes of input data (scanner Rx) and fault status data. It does not consume I/O data (scanner Tx).
Default Data Map
Message size: 24 Bytes
15
Input Channel 0 High Byte
Input Channel 1 High Byte
Input Channel 2 High Byte
Input Channel 3 High Byte
Input Channel 4 High Byte
Input Channel 5 High Byte
Input Channel 6 High Byte
Input Channel 7 High Byte
Produces (scanner Rx)
Status Byte for Channel 1
OR
Status Byte for Channel 3
OR
Status Byte for Channel 5
OR
Status Byte for Channel 7
OR
Consumes (scanner Tx) No consumed data
CF = Channel Fault status; 0 = no error, 1 = fault
CM = Calibration Mode; 0 = normal, 1 = calibration mode
LA = Low Alarm; 0 = no error, 1 = fault
HA = High Alarm; 0 = no error, 1 = fault
Where:
LLA = Low/Low Alarm: 0 = no error, 1 = fault
HHA = High/High Alarm; 0 = no error, 1 = fault
UR = Underrange; 0 = no error, 1 = fault
OR = Overrange; 0 = no error, 1 = fault

Interpret Status Indicators

See the following diagram and table for information on how to interpret the status indicators.
Module status
Network status
Status of input 0
Status of input 1
Status of input 2
Status of input 3
Indicator Status for Module
Status
Off
Flashing green
Green
Module status
Flashing red
Red
Flashing red/green
10
14 13 12 11 10
UR HHA LLA HA LA
UR HHA LLA HA LA
UR HHA LLA HA LA
UR HHA LLA HA LA
Module
Status
Network
Status
NODE:
4-20mA
Analog
Input
Status of input 4
0 4
Status of input 5
1 5
Status of input 6
6
2
Status of input 7
3 7
44351
1734
IE8C
Description
No power applied to device.
Device needs commissioning due to missing, incomplete, or incorrect configuration.
Device operating normally.
Recoverable fault.
Unrecoverable fault may require device replacement.
Device is in self-test mode.
Rockwell Automation Publication 1734-IN033E-EN-E - February 2021
09 08 07 06 05
Input Channel 0 Low Byte
Input Channel 1 Low Byte
Input Channel 2 Low Byte
Input Channel 3 Low Byte
Input Channel 4 Low Byte
Input Channel 5 Low Byte
Input Channel 6 Low Byte
Input Channel 7 Low Byte
Status Byte for Channel 0
CM CF OR UR HHA
Status Byte for Channel 2
CM CF OR UR HHA
Status Byte for Channel 4
CM CF OR UR HHA
Status Byte for Channel 6
CM CF OR UR HHA
04 03 02 01 00
LLA HA LA CM CF
LLA HA LA CM CF
LLA HA LA CM CF
LLA HA LA CM CF