Allen-Bradley C Series Installation Instructions
High resolution thermocouple/millivolt input module
Hide thumbs
Also See for C Series:
- Installation instructions manual (26 pages) ,
- Nstallation instructions (20 pages) ,
- Installation instructions (4 pages)
Table of Contents
Advertisement
Quick Links
Contents
This icon is used when
additional information is
available in the High Resolution
Thermocouple/Millivolt Input
Module User Manual,
publication 1771-6.5.131.
Prevent Electrostatic
Discharge
Allen-Bradley 1771-IXHR
High Resolution
Thermocouple/Millivolt
Input Module
(Catalog Number 1771-IXHR Series C)
Use this document as a guide when installing the 1771-IXHR/C High
Resolution Thermocouple/mV input module.
To
Prevent Electrostatic Discharge
Understand Compliance to European Union Directives 2
Understand Product Compatibility
Calculate Power Requirements
Determine Module Placement
Key the Backplane Connector
Install the Module and Field Wiring Arm
For this reference information
The High Resolution Thermocouple/Millivolt input module is
sensitive to electrostatic discharge.
ATTENTION: Electrostatic discharge can damage
integrated circuits or semiconductors if you touch
!
backplane connector pins. Follow these guidelines
when you handle the module:
•
Touch a grounded object to discharge static potential
•
Wear an approved wrist-strap grounding device
•
Do not touch the backplane connector or
connector pins
•
Do not touch circuit components inside the module
•
If available, use a static-safe work station
•
When not in use, keep the module in its
static-shield bag
Installation Instructions
See page
Below
2
3
3
3
4
5
6
7
See page
9
9
11
Publication 1771-5.66 – October 1998
Advertisement
Table of Contents
Related Manuals for Allen-Bradley C Series
Summary of Contents for Allen-Bradley C Series
- Page 1 Do not touch the backplane connector or connector pins • Do not touch circuit components inside the module • If available, use a static-safe work station • When not in use, keep the module in its static-shield bag Allen-Bradley 1771-IXHR Publication 1771-5.66 – October 1998...
- Page 2 High Resolution Thermocouple/Millivolt Input Module Connect Wiring to the Connect your I/O devices to the field wiring arm (cat. no. 1771-WI) Field Wiring Arm shipped with the module. ATTENTION: Remove power from the 1771 I/O chassis backplane and field wiring arm before removing or installing an I/O module.
- Page 3 Attacher tous connecteurs fournis par l’utilisateur et reliés aux Allen-Bradley product using screws, sliding latches, threaded circuits externes d’un appareil Allen-Bradley à l ’aide de vis, connectors, or other means such that any connection can loquets coulissants, connecteurs filetés ou autres moyens withstand a 15 Newton (3.4 lb.) separating force applied for a...
- Page 4 High Resolution Thermocouple/Millivolt Input Module Specifications Description Value Number of Inputs 8, all of the same type or 4 each of 2 different types Module Location 1771 I/O chassis – 1 module slot Type of Input (Selectable) Type B, Pt–30% Rh/Pt–6% Rh (320 to 1800 Type E, chromel/constantan (–270 to 1000 Type J, iron/constantan...
Need help?
Do you have a question about the C Series and is the answer not in the manual?
Questions and answers