Communicate With Your Module - Allen-Bradley C Series Nstallation Instructions

12 POINT I/O Synchronous Serial Interface Absolute Encoder Module
Wiring for 1734-SSI
0
D+
2
V+
4
Shield
6
C+
D = Data, I1 = Digital, Sourcing
Input 1, C = Clock, V = SSI Sensor

Communicate with Your Module

The module transmits SSI sensor data over the DeviceNet network. You exchange data
with the master through a polled, cyclic, or change-of-state connection.
The module does not support Bit-Strobe Command Response Messaging and the
Unconnected Message Manager (UCMM). If you are not familiar with these terms, see
the DeviceNet Specification for definitions at http://www.odva.org.
The module produces and consumes data as follows:
I/O Connection Type
Polled
Cyclic
Change-of-state
Publication 1734-IN581E-EN-E - October 2015
1
D-
3
V-
5
I1
7
C-
Termination Definition
0
1
2
3
4
5
6
7
(1)
D and C terminations are
RS422-type differential pairs.
Consumes Produces
2 bytes 10 bytes
2 bytes 10 bytes
2 bytes 10 bytes
(1)
D+
D-
V+
V-
Shield
I1
C+
C-