Menu - User; Menu - Service - Neptronic SKE4-E05 Installation Instructions And User Manual

Menu - User

[Level 2 - Requires level 2 (or higher) password in order to access]
Sub-Menu Setting
Command OccupSchedule:
RoomDemandLoop
RoomRHStp:
RoomRHUnocStp:
Control
RoomRHVacStp:
SupplyHLLoop
SupplyHLStp:
System LocalDateTime:
BacklightLvl:
Contrast:
KeypadBuzzer:
Interface
Language:
Units:

Menu - Service

[Level 3 - Requires level 3 (or higher) password in order to access]
Sub-Menu Setting
RunTime:
OnTime:
Status
ServRunTime:
ServOnTime:
ServiceDue:
DrainSchedule:
Command
Request:
Extended Config
WaterProbeAutoCalib:
www.neptronic.com
Default
00:00
- Monday to Sunday
Event 1 to Event 6
[3]
40.00% min: 0.00%, max: 100.00%
30.00% min: 0.00%, max: 100.00%
20.00% min: 0.00%, max: 100.00%
[1]
80.00% min: 0.00%, max: 100.00%
YYYY-MM-DD
00:00:00
25% min: 0%, max: 100%
10% min: 0%, max: 30%
Inactive Inactive, Active
English (Language options vary based on region.)
Metric Metric, Imperial
Default
(* indicates no configuration; display only)
0.00hr *
0.00hr *
0.00hr *
0.00hr *
Off * (Off, On)
00:00
- Monday to Sunday
Event 1 to Event 6
None None, Reset Alarms, Drain, Reset Counters
Always None, Once, Always
Range
Create a customized occupancy schedule with up to six events per day.
(Only appears if ControlProfile is set to an internal control mode or
HumCntrlDemandSrc is set to RoomDemand.)
Only appears if ControlProfile is set to an internal control mode or
HumCntrlDemandSrc is set to RoomDemand.
Define the room demand setpoint value used during Occupied state.
(Only appears if RoomRHStptSrc is set to Internal.)
Define the room demand setpoint value used during Unoccupied state.
Define the room demand setpoint value used during Vacant state.
Only appears if ModHLProfile is set to an internal control mode or
HumCntrlHLSrc is set to SupplyHLDemand.
Define the supply high limit demand setpoint value.
Configure the current date and time.
Select the backlight level of the LCD screen.
Select the contrast level of the LCD screen.
Select whether to enable or disable the key press sound.
Select the device language.
Select whether to use a metric or imperial system of units for the local
device.
Range
Displays the total runtime of the unit.
Displays the total operating time of the unit.
Displays the runtime of the unit, since the last servicing.
Displays the operating time of the unit, since the last servicing.
Displays whether the humidifier is due for servicing.
Create a customized draining schedule with up to six events per day.
Perform one of the following actions for the humidifier: reset service counters,
initiate a drain cycle or reset warning alarms.
Select the frequency of the auto calibration setting for the water level sensor.
SKE4-E Steam Humidifier
Installation Instructions and User Manual
Description/Notes
Description/Notes
Page | - 44 -