Modulating Humidifier - Neptronic SKE4-E05 Installation Instructions And User Manual

SKE4-E Steam Humidifier
Installation Instructions and User Manual

Modulating Humidifier

Analog Signals
For operation of modulating humidifiers, the analog signal(s) must be connected between terminals
TB4 1 and TB4 3, 4 and/or 5. To configure the source of the signal(s), access the Control sub-menu
located in the Installation menu (see page 45).
Humidity Control by Humidistat (External Mode)
Humidity controlled externally, using HRO20 humidistat:
Illustration 37 - Control Signal from HRO20 Humidistat
www.neptronic.com Page | - 35 -