Idle Screen; Menu Access - Neptronic SKE4-E05 Installation Instructions And User Manual

Idle Screen

When the controller is in operation, the unit displays the following information on the Idle Screen:
Table 11 - Idle Screen Display Description
Setting Default
HumDemand: Current value
ControlState: Normal
SteamOutput: Current value
Power: Current value
State: Current value

Menu Access


From the Idle Screen, the Main Menu can be accessed by pressing the Menu button
enabling access to the General menu.
 To view other menu options and perform configurations to the system, press Enter  while on
the Idle Screen to advance to the Login Screen, where a valid password must be entered.

Four different passwords can be used, each granting access to an additional menu option
depending on the access level assigned to the provided password.

If a password of higher access is provided, all menu options accessible with the use of a
lower level password will also be unlocked.
Table 12 - Access Levels
Access
Password
Level
1 None
2 2222
3 3322
4 4433
5 5544
Note: To modify or retrieve lost passwords, please contact factory.
www.neptronic.com
Installation Instructions and User Manual
Range
(* indicates no configuration; display only)
* (min: 0.00%, max: 100.00%)
* (Normal, LowLimit, HighLimit, NoAirFlow,
Interlock)
* (min: 0.00%, max: 100.00%)
* (Off, On)
* (Off, Idle, LineRinse, TankRinse, Filling,
Draining, Heating, Boiling, Alarm)
Illustration 43 - Idle Screen Display
Menu Unlocked
General Grants access to General menu.
User Grants access to General and User menus.
Service Grants access to General, User and Service menus.
Installation Grants access to General, User, Service and Installation menus.
Integration Grants access to General, User, Service, Installation and Integration menus.
SKE4-E Steam Humidifier
Description/Notes
Displays the current humidity demand
value.
Displays the current state of the safety
control circuit and whether the circuit has
been disconnected due to a safety switch.
Displays the measured steam output of
the system.
Displays whether the humidifier is
powered on or off.
Displays the current state of operation of
the humidifier.
Description/Notes
,
Page | - 40 -