Table of Contents
Advertisement
Rescue Mode
© Copyright Lenovo 2018
The Rescue Mode option allows you to recover from a failed firmware or boot
image upgrade using TFTP or a USB drive.
To enter Rescue Mode, select Recovery Mode in the GRUB menu. The following
menu appears.
Entering Rescue Mode.
Please select one of the following options:
T) Configure networking and tftp download an image
U) Install image from USB stick
F) Run filesystem check
I) Select which image to boot
C) Reset configuration to factory default
Z) Reset the Network Administrator (admin) password
B) Reset the password required to enter privileged exec mode
R) Reboot
E) Exit
Option? :
The Rescue Mode menu allows you to perform the following actions:
To recover from a failed software or boot image upgrade using TFTP, press T
and follow the screen prompts.
To recover using an image from a USB stick, press U.
To check if the switch is ready to run Cloud NOS, press F. It performs a check to
see if the filesystem is optimally partitioned and updates it accordingly.
To select which firmware image to boot, press I.
To reset the switch configuration to factory defaults, press C.
To reset the Network Administrator account (admin) password, press Z.
To reset the password required to enter Privileged EXEC mode, press B.
To restart the reload process from the beginning, press R.
To exit the Rescue Mode menu, press E.
Chapter 5: Initializing the NE0152T
83
Advertisement
Table of Contents
