Troubleshooting Flowchart - Ruijie RG-AP130(W2) V2 Series Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
6 Troubleshooting

6.1 Troubleshooting Flowchart

6.2 Troubleshooting
LED does not light up after the AP is powered on
Verify that the power source is IEEE 802.11af compliant. And then verify that the cable is connected properly.
Orange LED blinks after the Ethernet cable is connected
Verify that the device at the other end of the Ethernet cable is working properly. And then verify that the Ethernet cable is
capable of providing the required data rate and is properly connected.
Wireless client cannot find the AP
1) Follow the above-mentioned two steps.
2) Verify that the AP is configured correctly.
3) Adjust the transmit power.
4) Move the client device to adjust the distance between the client and the AP.
The installation instruction above is based on RG-AP130(W2) V2. The actual product prevails.
Troubleshooting
·