Specifications - 3D Systems ZPrinter 350 User Manual

® ®
ZPrinter 350 / ZPrinter

1.2 Specifications

Printer Dimensions and Type
Printer Weight
Network Connectivity
Operating Environment
Ambient Temperatures
Ambient Relative Humidity
Build Volume
Build Speed
Layer Thickness
Resolution
Noise Levels
CSA, CE Approval
3dscentral.3dsystems.com
10/31/12
450 User Manual
• With top cover closed: 48" wide x 31" deep x 55"
high. (122cm wide x 79cm deep x 140cm high)
• With top cover open: 48" wide x 31" deep x 72.3"
high. (122cm wide x 79cm deep x 183cm high)
• Floor standing model on four casters. The front two
casters are lockable.
• Integrated vacuum system.
• Integrated fine powder removal chamber.
• Full color capability; color shell thickness = .025"
(ZPrinter 450 only)
425 lbs., 193 kg.
TCP/IP 100/10 Base T
• Maximum Temp. Range: 50-85° F (10 - 29.4° C)
• Recommended Temp. Range: 55-80° F (12.7 - 26.6°
C)
• Maximum RH Range: 15 - 70%, non-condensing
• Recommended RH Range: 20 - 60%, non-condens-
ing
(May experience sub-optimal performance at extremes.)
8" x 10" x 8" (203 mm x 254 mm x 203 mm)
640 cubic inches build capacity
2-4 layers per minute
.0035" - .004" (.089 - .102 mm)
300 x 450 dpi print resolution
During Printing = 57dB
Emptying Overflow = 66dB
Vacuuming - Cover Open = 86dB
Fine Powder Removal = 80dB
Meets CE certification standards and UL standards.
ZPrinter 350 and ZPrinter 450 Overview
2 All Rights Reserved