Not Ready To Print - 3D Systems ZPrinter 350 User Manual

® ®
ZPrinter 350 / ZPrinter

5.2.2 Not Ready to Print

If there are not enough materials to complete the job, or the printer is not properly prepared, a mes-
sage appears similar to the examples in red above. When any one of these messages appears, the
Print button is disabled. The remainder of this chapter describes how to clear a message in the Printer
Status dialog and start the build.
3dscentral.3dsystems.com
10/31/12
450 User Manual
42
Additional Operations
All Rights Reserved