Printer Storage Preparation - 3D Systems ZPrinter 350 User Manual

® ®
ZPrinter 350 / ZPrinter 450 User Manual Printer Maintenance
4. The printer will automatically reboot.
5. Wait for the LCD to display ONLINE before continuing.
6. After rebooting, in ZPrint select Service > Check Status. Verify that the new firmware version number is
listed.

6.7 Printer Storage Preparation

The ZPrinter 350/450 should never be turned off so it can automatically service the print head and exercise
the moving components during idle times.
If the printer will be unused for an extended period (several weeks or even months), some extra care is
required to be sure your printer is ready to go when it is reactivated. Contact your dealer and request a
copy of the Summer Storage Procedure. You can also download it from our Web site at
3dscentral.3dsystems.com.
3dscentral.3dsystems.com 57 All Rights Reserved
10/31/12