Change Print Head(S) - 3D Systems ZPrinter 350 User Manual

® ®
ZPrinter 350 / ZPrinter

5.3 Change Print Head(s)

If the Printer Status dialog indicates a print head needs changing, follow the steps below.
1. Open the printer top cover.
2. On the printer's LCD menu, select
the Fast Axis out over the Build Bed.
3. If the piston is not already lowered some distance into the build box, lower it now by selecting
. The piston will lower a short distance. To lower it further, select
PISTON
4. Open the carriage cover by releasing the latch.
5. Lift print head out of its slot and properly recycle or dispose of the empty cartridge.
On a Zprinter 450, ALSO remove the other printhead even if it does not need replacing.
3dscentral.3dsystems.com
10/31/12
450 User Manual
PRINT HEAD then CHANGE PRINT HEAD
43
Additional Operations
. The Printer moves
LOWER
again.
LOWER PISTON
All Rights Reserved