Next Step: Cleaning The Printer - 3D Systems ZPrinter 350 User Manual

® ®
ZPrinter 350 / ZPrinter 450 User Manual Setup And Print The Build
Refer to the Color Quality Best Practices document for complete information.

2.12 Next Step: Cleaning the Printer

Right now - after depowdering and before post-processing - while the part continues to dry, take a few min-
utes and clean the printer.
Regular cleaning and maintenance is the simplest, best way to ensure your parts look their best,
and to keep your printer running trouble-free.
See Section 3, 'Routine Cleaning' for complete details on how to perform these routine cleaning tasks.
After you have cleaned and prepared the printer for the next build, proceed with the Post-Processing steps
in Section 4, 'Post-Processing With Z-Bond'.
3dscentral.3dsystems.com 29 All Rights Reserved
10/31/12