Clean The Service Station; Example - Dirty Service Station - 3D Systems ZPrinter 350 User Manual

® ®
ZPrinter 350 / ZPrinter

3.4 Clean The Service Station

The function of the Service Station is to clean the print head during printing. Clean the Service Station after
every build to remove residue buildup and ensure the print head is kept clean.
Before you begin:
• Get several dry paper towels and some cotton swabs.
• Get the squirt bottle filled with distilled water.
• Wear disposable gloves.
• Get the Pick from the Accessories Kit.

3.4.1 Example - Dirty Service Station

3dscentral.3dsystems.com
10/31/12
450 User Manual
Number Description
1 Powder Residue
2 Ink, Binder Residue
33
Routine Cleaning
All Rights Reserved