Additional Information; Materials; Service - 3D Systems ZPrinter 350 User Manual

® ®
ZPrinter 350 / ZPrinter
ERROR CODE
Error 1905 Explanation: This error is caused by a layer that is too large for
the printer's buffer. The printer is unable to process the layer and
reports the error. This is most common with GIS, architecture, and
scanned files, which are usually very large.
Solution: Try rotating the part on the X-Z-axis to increase the
layer count and reduce the size of each layer. The risk in doing this
is ZPrint is unable to check for layer size before it begins the build.
We recommend reducing the detail on the file and trying the print
again.

7.12Additional Information

7.12.1 Materials

Visit the Materials section of our Web site to get the latest information on:
• Materials that are compatible with your printer.
• Best Practices to help you create the very best parts.
3dscentral.3dsystems.com

7.12.2 Service

Visit the Support section of our Web site for tips on maintaining your printer, troubleshooting problems, or
to contact our Service staff:
3dscentral.3dsystems.com
3dscentral.3dsystems.com
10/31/12
450 User Manual Troubleshooting the ZPrinter 350/450
74 All Rights Reserved