Troubleshoot Print Head/Weak Parts - 3D Systems ZPrinter 350 User Manual

® ®
ZPrinter 350 / ZPrinter 450 User Manual Troubleshooting the ZPrinter 350/450

7.3.2 Troubleshoot Print Head/Weak Parts

If your printer is reporting print head errors, or is building parts that break too easily, follow the flowchart
below. Also see Section 7.8, 'Part Quality Issues Streaky/Striped Parts, Delamination, Weak Parts'.
How to do it
To remove the printhead and clean the pogo pins, follow the steps in Section 5.3, 'Change Print Head'.
3dscentral.3dsystems.com 62 All Rights Reserved
10/31/12