Fuse Replacement - Electric Start Models - Mercury 10 FOURSTROKE Installation Operation Maintenance Warranty Manual

9. Place a block of wood between the gearcase and the propeller to prevent
rotation and tighten the propeller nut to the specified torque.
NOTE: If the propeller nut doesn't align with the propeller shaft hole after
tightening, tighten the nut further to align with the hole.
10. Align the propeller nut with the propeller shaft hole. Insert a new cotter pin
in the hole and bend the ends.
a
a - Cotter pin
b - Propeller nut
c - Rear thrust washer
d - Front thrust hub ‑ Larger diameter end towards propeller
Description
Propeller nut
Fuse Replacement ‑ Electric Start Models
IMPORTANT: Always carry spare 20 amp fuses.
eng
MAINTENANCE
b
c
89
Nm lb‑in.
12 106
d
31926
lb‑ft
8