Table of Contents
Advertisement
The adjustment of the tilt‑in stop pins will set the vertical operating angle of
your outboard. Proper adjustment allows the boat to run stable, achieve
optimum performance, and minimize steering effort.
a
NOTE: Refer to the following lists when adjusting the operating angle of your
outboard.
The tilt‑in stop pins should be adjusted so the outboard is positioned to run
perpendicular to the water when the boat is running at full speed. This allows
the boat to be driven parallel to the water.
Arrange passengers and load in the boat so the weight is distributed evenly.
a
b
a -
Too much angle (stern down ‑ bow up)
b -
Not enough angle (stern up ‑ bow down)
c -
Angle adjusted properly (bow slightly up)
eng
FEATURES AND CONTROLS
32192
c
a -
Tilt‑in stop pins
a
61
32191
Advertisement
Table of Contents
