Table of Contents
Advertisement
3. Remove the fill/drain plug, vent plug, and drain the lubricant.
a
b
GEARCASE LUBRICANT CAPACITY
Approximately 370 ml (12.5 fl. oz.).
GEARCASE LUBRICANT RECOMMENDATION
Mercury or Quicksilver Premium or High Performance Gear Lubricant.
CHECKING LUBRICANT LEVEL AND FILLING GEARCASE
1. Place the outboard in a vertical operating position.
2. Remove the vent plug from the vent hole.
3. Place the lubricant tube into the fill hole and add lubricant until it appears
at the vent hole.
IMPORTANT: Replace the sealing washers with new sealing washers.
4. Stop adding lubricant. Install the vent plug and sealing washer before
removing the lubricant tube.
MAINTENANCE
31932
98
a -
Vent plug
b -
Fill/drain plug
eng
Advertisement
Table of Contents
